Custom Horizontally-Convex Bass Drum Plates
Please fill out the information above to have us create a custom bass drum plate made to your specifications! We just need some information from you, which you can input in the fields above!
All measurements must be taken in millimeters!
First, we need to know how big you want the overall size of the plate to be. The first and second fields are for the overall width and depth of the plate. How big does it need to be to cover the same area (or a little more) that the previous mount covered?
Secondly we need to know the hole spacing. This measurement is VERY IMPORTANT. Please be sure to take these measurements from the bass drum itself WITHOUT the tom mount installed (this process will often result in a poorly-fit plate if the measurements are taken from the mount). Please measure from the center of each drilled hole on the top of the bass drum. The third and fourth text fields above are for the center-hole to center-hole measurements, from left to right, and lastly from front to back, of the hole spacing.
Each purchase comes with 2 plates. One for the top of your bass drum, and a thinner plate for the inside. Assembly hardware is included (unless selected otherwise). Each hole is 6.5mm in diameter and designed to fit standard m5 hardware.
Returns are not offered on custom order drum plates. The items will be custom made to your specifications. Please measure carefully and accurately!
* Note: The points where the convex edges start is calculated based off of the hole-spacing parameters.